LG 26LD330

Main support forum

LG 26LD330

Postby arddhu » 27 May 2011, 08:05

Hello, I am new here, few months ago I bought a LG 26LD330, a good TV that is almost perfect to me. In it's back there is a USB "Jack in" written "USB in service only".

Since I have seen over the web that a lot of LG LCD TVs have some tricks to access a hidden menu, I started to seach how would be possible to gain access to this USB Port, watch DivX, see Jpegs and hear MP3. I am searching over the web for more than two months now without any success.

Can anyone help me with this issue, how to access this hidden menu and then how to unleash all capabilities of my TV?

Thank you. :|
arddhu
 
Posts: 2
Joined: 17 Apr 2011, 16:46

Advertisement

Re: LG 26LD330

Postby sirius » 27 May 2011, 11:13

== my set: LG 50PK950 Broadcom based plasma tv, FW 04.20.00 / OpenLGTV BCM ==
sirius
 
Posts: 120
Joined: 21 Feb 2011, 20:32

Re: LG 26LD330

Postby sirius » 27 May 2011, 11:14

== my set: LG 50PK950 Broadcom based plasma tv, FW 04.20.00 / OpenLGTV BCM ==
sirius
 
Posts: 120
Joined: 21 Feb 2011, 20:32

Re: LG 26LD330

Postby arddhu » 27 May 2011, 16:41

Ok, The first site tell me how to activate with an USB2COM cable but I can't se my model listed there. The only thing closest is the 32LD420?

On the second link, there is no usefull info, since the person that says "how to" don't give the formula to it.

Thank you for your attention, but I am still in the same situation.
arddhu
 
Posts: 2
Joined: 17 Apr 2011, 16:46

Re: LG 26LD330

Postby sirius » 27 May 2011, 20:36

Hi,

it should be possible at least with serial cable / usb2serial adaptor. First you have to enter debug menu as described here: http://openlgtv.org.ru/wiki/index.php/D ... connection
After that you have to enter EZ_ADJUST menu and change tool option as described at the bottom of this page: http://openlgtv.org.ru/wiki/index.php/H ... via_serial

Good luck!
== my set: LG 50PK950 Broadcom based plasma tv, FW 04.20.00 / OpenLGTV BCM ==
sirius
 
Posts: 120
Joined: 21 Feb 2011, 20:32

Re: LG 26LD330

Postby vinny1057 » 21 Aug 2011, 18:40

works fine with serial cable for me.
vinny1057
 
Posts: 4
Joined: 18 Aug 2011, 10:13


Return to Support

cron