Remote keys service combinations

From Openlgtv
Jump to: navigation, search

Remote control key combination for entering Installation menu (All models)

  • Press and hold MENU on the remote control for 5 seconds, then enter 1105 and press OK - Installation menu

Remote control service key combinations for Saturn 4 based TVs

  1. Press MENU on the remote control and select(highlight) Options and press OK
  2. Select briefcase icon
  3. Press "7" 7 times - it will show window of firmware upgrade from USB

Remote control service key combinations for all 2009 and some 2010 year models (Saturn 6 based)

Press MENU on the remote control and select(highlight) Options (don't press OK):

  • Press "FAV" 7 times - firmware upgrade from USB
  • Press "1" 7 times - firmware upgrade from USB (file LG6000)
  • Press "7" 7 times - upgrade bootloader (u-boot-spi.epk should be in the root folder of the USB drive and should be higher version than current version of the bootloader)
  • Press "9" 7 times - revert to backup firmware (WARNING: If your tv never has been updated the following procedure may brick it! This option is not always save when TV has already upgraded also!)

Enter OPTION, select briefcase icon but make sure you will not enter the menu (nothing must be selected on the right side if yes use left arrow to deselect) Press the FAV or Mark key 7 times - firmware upgrade from USB

Saturn 6 and Saturn 7 patches to access service menus

To enter EZAdjust or InStart menu via Installation menu, apply corresponding patches in telnet or in LGMOD WebUI->Tools->Execute shell command: http://openlgtv.org.ru/wiki/index.php/LGMOD_Patches_for_RELEASE

Firmware version 3.20.19 Broadcom based models

To enter EZAdjust or InStart menu on 3.20.19 firmware (on Broadcom based models) via Installation menu, enter following patches in telnet, ssh or in OpenLGTV BCM WebUI->Shell command to execute:

To make RELEASE think that Debug Mode is set to DEBUG:

devmem 0x26E9AE4 32 0x24020003

To make RELEASE think that Debug Mode is set to EVENT:

devmem 0x26E9AE4 32 0x24020004

To make RELEASE think that Debug Mode is set to RELEASE:

devmem 0x26E9AE4 32 0x24020005

To enter EZAdjust window via Installation menu:

devmem 0x2912124 32 0x0C214EC9

To enter InStart window via Installation menu:

devmem 0x2912124 32 0x0C2141D9

To execute InStop command via Installation menu (resets TV configuration to factory default):

devmem 0x2912124 32 0x0C1C206B

Combinations for broadband 2010 years models

Menu - select Options (but don't enter):

  • Press "2" 7 times - show text "Forced update has been set". Disappears in few seconds.
  • Press "3" 7 times - shows:
Upgrade TV software
current version : Вер.AN-WL100x`OLD`
update version : Вер.AN-WL100x`NEW`

File:/mnt/usb1/Drive1/wireless_baseband.alf
  • Press "4" 7 times - shows:
Upgrade TV software
current version : Вер.AN-WL100x`OLD`
update version : Вер.AN-WL100x`NEW`

File:/mnt/usb1/Drive1/wireless_rx_stmhost.bin
  • Press "5" 7 times - shows:
Upgrade TV software
current version : Вер.AN-WL100x`OLD`
update version : Вер.AN-WL100x`NEW`

File:/mnt/usb1/Drive1/wireless_rx_stmboot.bin
  • Press "6" 7 times - shows:
Upgrade TV software
current version : Вер.AN-WL100x`OLD`
update version : Вер.AN-WL100x`NEW`

File:/mnt/usb1/Drive1/wireless_rx_irblaster.bin
  • Press "9" 7 times - show text "Program restore has been completed". Disappears and reboots in few seconds.

Combinations for broadband 2011 years models

Enter OPTION, select briefcase icon but make sure you will not enter the menu (nothing must be selected on the right side if yes use left arrow to deselect)

Press the FAV or Mark key 4 times.